McCulloch M95-66XC Operator's Manual download pdf (Page 17)

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS:

1. Depress clutch/brake pedal fully and set parking brake.

2. Place motion control lever in neutral (N) position.

3. Place deck clutch in “DISENGAGED” position.

4. Turn ignition key to “STOP” and remove key.

5. Make sure the blade and all moving parts have completely stopped.

6. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

RIDING MOWER

TO REMOVE MOWER

1. Place deck clutch in “DISENGAGED" position.

2. Move mower height adjustment lift lever forward to low er

mower to its lowest po si tion.

3. Remove mandrel cover.

4. Remove pins holding left and right front mower

suspension arms in place.

5. Remove bolt holding deck front to rear leveling rod in

place.

6. Remove pin holding deck lift link arm in place.

7. Remove bolt holding deck side to side leveling rod in

place.

8. Remove belt from around pulleys.

9. Slide deck out from under side of mower.

TO INSTALL MOWER

Install in reverse order following instructions in "TO RE-

MOVE MOWER" section.

Deck Leveling Side to

Side Rod Bolt

Mandrel Cover

Deck Lift Link

Front Leveling Rod

Bolt

Mower

Suspension Arm

SERVICE AND ADJUSTMENTS

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

McCulloch M95-66XC Operator's Manual Page 17