McCulloch CS 410 Operator's Manual download pdf (Page 16)

ASSEMBLY

16 – English

Fitting the bar and chain

Check that the chain brake is in disengaged position by

moving the front hand guard towards the front handle.

(25)

Remove the knob and remove the clutch cover (chain

brake). Take off the transportation ring. (18)

Fit the bar over the bar bolts. Place the bar in its rearmost

position. Place the chain over the drive sprocket locate it

in the groove on the bar. Begin on the top edge of the bar.

Make sure that the edges of the cutting links are facing

forward on the top edge of the bar. (19)

Fit the clutch cover (chain brake) and locate the chain

adjuster pin in the cut-out in the bar. Check that the drive

links of the chain ﬁt correctly on the drive sprocket and

that the chain is in the groove on the bar.

Tension the chain by turning the wheel down (+). The

chain should be tensioned until it does not sag from the

underside of the bar. (14)

The chain is correctly tensioned when it does not sag from

the underside of the bar, but can still be turned easily by

hand. Hold up the bar tip and tighten the bar knob by

turning the knob clockwise. (15)

When ﬁtting a new chain, the chain tension has to be

checked frequently until the chain is run-in. Check the

chain tension regularly. A correctly tensioned chain

ensures good cutting performance and long life. (11)

Fitting a spike bumper

The spike bumper is factory ﬁtted on CS 450 Elite. To ﬁt a

spike bumper on CS 410 Elite - contact your servicing

dealer (retailer).

WARNING! Switch off the engine before

carrying out any checks or maintenance.

The stop switch automatically returns to

the start position. In order to prevent

unintentional starting, the spark plug cap

must be removed from the spark plug

when assembling, checking and/or

performing maintenance.

Always wear gloves, when working with

the chain, in order to protect your hands

from injury.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

Comments to this Manuals

No comments

McCulloch CS 410 Operator's Manual Page 16

Comments to this Manuals

Related products and manuals for Power chainsaws McCulloch CS 410