McCulloch B28 PS Operator's Manual download pdf (Page 10)

English--- 10

115432326 Rev. 4 2/17/12

ASSEMBLY

Dismantling:

S Loosen the coupling by turning the knob.

S Press and hold the locking/release button

(A).

S While securely holding the engine and

upper shaft, pull the attachment straight

out of the coupling.

NOTE: M ake sure unit is assembled

correctly as shown in this manual.

Fitting the loop handle

S Position the handle on the shaft. Note that

the handle must be mounted between the

two arrows on the shaft.

S Fit the screw, securing plate and wing nut

as shown in the diagram.

S Make a final adjustment of the J--handle

to a comfortable working position.

Tighten the wing nut.

W ARNING: To avoid serious

injury, only use grass blades/grass

cutters or trimmer heads with plastic

blades when the J-handle is fitted.

Never use saw blades!

Assembling and dismantling

thetwo--pieceshaft

Assembly:

S Loosen the coupling by turning the knob.

S Position locking/release button (A) of

attachment into guide recess (B) of

coupling.

B

A

S Push the attachment into the coupling

until the locking/release button snaps

into the primary hole (C).

S Before using the unit, tighten the knob

securely.

C

W ARNING: All attachments are

designedtobeusedintheprimary

hole unless otherwise stated in the

applicable attachment instruction

manual . Using the wrong hole could

lead to serious injury or damage to

the unit.

A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Comments to this Manuals

No comments