McCulloch CS 410 Operator's Manual download pdf (Page 28)

28 – English

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the

Maintenance section.

Daily maintenance Weekly maintenance Monthly maintenance

Clean the outside of the machine.

Check the starter, the starter cord

and the recoil spring.

Check the brake band on the chain

brake for wear. Replace when less

than 0.6 mm (0,024 inch) remains at

the most worn point.

Check that the components of the

throttle control work safely. (Throttle

lockout and throttle control.)

Check that the vibration damping

elements are not damaged.

Check the clutch centre, clutch drum

and clutch spring for wear.

Clean the chain brake and check that

it operates safely. Make sure that the

chain catcher is undamaged, and

replace it if necessary.

File off any burrs from the edges of

the bar.

Clean the spark plug. Check that the

electrode gap is 0.5 mm.

The bar should be turned daily for

more even wear. Check the

lubrication hole in the bar, to be sure

it is not clogged. Clean the bar

groove. If the bar has a sprocket tip,

this should be lubricated.

Clean the carburettor compartment. Clean the outside of the carburettor.

Check that the bar and chain are

getting sufﬁcient oil.

Clean the air ﬁlter. Replace if

necessary.

Check the fuel ﬁlter and the fuel

hose. Replace if necessary.

Check the saw chain with regard to

visible cracks in the rivets and links,

whether the saw chain is stiff or

whether the rivets and links are

abnormally worn. Replace if

necessary.

Empty the fuel tank and clean the

inside.

Sharpen the chain and check its

tension and condition. Check the

drive sprocket for excessive wear

and replace if necessary.

Empty the oil tank and clean the

inside.

Clean the starter units air intake. Check all cables and connections.

Check that nuts and screws are tight.

Check that the stop switch works

correctly.

Check that there are no fuel leaks

from the engine, tank or fuel lines.

1 2 ... 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments

McCulloch CS 410 Operator's Manual Page 28

Comments to this Manuals

Related products and manuals for Power chainsaws McCulloch CS 410