McCulloch EB356 Service Manual download pdf (Page 13)

SOI/TD - PR 13 599 36 25-10

3.7 Programme execution

3.7.1 Cycle start

 With door closet and after the countdown has elapsed the selected programme automatically starts.

 At this point, the delayed start time cannot be changed and no other options can be selected

 The programme in progress can be cancelled, see 3.8.1

 The programme can be modified, see 3.8.2

3.7.2 Cycle execution

 The LED for the selected programme is lit.

 The display shows the minutes of wash time remaining.

 The time until the end of the cycle is updated at every new phase in the programme.

 When the system moves from one phase to another, the time remaining until the end of the

cycle may be lowered more than the actual time elapsed.

 When the system moves from one phase to another, the time remaining until the end of the

cycle may stop until the system synchronises.

 The beamer projects a beam of light.

3.7.3 End of cycle

 The LED for the selected programme is lit.

 The display shows “0”.

 The LED showing the end of the cycle is lit.

 The beamer switches off.

 If it is installed and enabled, the buzzer will emit a sequence of sounds at the following intervals:

 15 seconds on - 3 minutes off - 15 seconds on – 3 minutes off - 15 seconds on – buzzer

remains off.

 The buzzer is disabled as soon as the door is opened.

 At the end of the cycle, the “0” on the display can be eliminated by opening and closing the door.

 After the door has been closed, the appliance will automatically be set to the selection

mode.

 Press the S0 button to turn the appliance off completely.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 46 47

No comments

McCulloch EB356 Service Manual Page 13