SOI/TD - PR 4 599 36 25-10
1 Purpose of this manual
The purpose of this manual is to provide service personnel (who already have the basic knowledge
necessary for repairing dishwashers) with information on dishwashers equipped with the EDW2003 electronic
control system, which are produced in the Solaro (MI - Italy) factory.
The EDW2003 control system is composed of a main (input) board, a display (output/interface) board
housed in the control panel, and a mother board housed in the lower part of the appliance.
The subjects covered in this manual are:
• General characteristics
• Control panel and programming
• Build features
• Electrical components and their operation
• Guide to the diagnostic system
• Operation of electrical systems
For detailed information on the water circuits and build characteristics of the appliance, refer to the Service
Manual for the “DIVA 60cm” (publication no. 599 35 55-25).
Work on electrical equipment must be performed by qualified personnel, only.
Pull out the power plug before working on internal components.
2
GENERAL CHARACTERISTICS
Important
When the appliance is plugged in, mains voltage is present on all circuit boards even if the
ON/OFF button is OFF.
Power supply ⇒ 230 - 240 V / 50 Hz (limits 187-254 V)
Total power drawn ⇒ 2300 W
Water supply ⇒ Min. / Max. Pressure: 5 - 80 N/cm
2
Load capacity ⇒ 12 Place settings
Dimensions:
- width ⇒ 59.6 cm
- height ⇒ 81.8 -87.8 cm (DIVA 60 cm BIG 86.8 – 92.8 cm)
- depth ⇒ 55.5 cm
Controls
- Power up / Power down ⇒ ON/OFF button
- Selection of programmes/options ⇒ By button (min. 3, max. 9)
- Display ⇒ 2.5 digit display, backlit characters and/or LEDs
Washing systems ⇒ Combined / Pulse
Water fill level control ⇒ Pressure switch + Software
Water heating ⇒ Heating element enclosed in tube (2100 W)
Temperature control ⇒ NTC temp. sensor
Drying systems ⇒ Activ / Turbo
Safety systems / Alarms ⇒ Full protection of water/electrical systems and Software
Comments to this Manuals