McCulloch CS 340 Owner's Manual Page 17
- Page / 86
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
FUEL HANDLING
English – 17
1154657-49 Rev.5 2013-12-10
Fuel safety
• Never refuel the machine while the engine is running.
• Make sure there is plenty of ventilation when refuelling
or mixing fuel (gasoline and 2-stroke oil).
• Move the machine at least 10 ft (3 m) from the
refuelling point before starting it.
• Never start the machine:
1 If you have spilled fuel or chain oil on the machine.
Wipe off the spillage and allow remaining fuel to
evaporate.
2 If you have spilled fuel on yourself or your clothes,
change your clothes. Wash any part of your body that
has come in contact with fuel. Use soap and water.
3 If the machine is leaking fuel. Check regularly for leaks
from the fuel cap and fuel lines.
Transport and storage
• Always store the chain saw and fuel so that there is no
risk of leakages or fumes coming into contact with
sparks or naked flames from electrical equipment,
electric motors, relays/switches, boilers and the like.
• Always store fuel in an approved container designed
for that purpose.
• For longer periods of storage or for transport of the
chain saw, the fuel and chain oil tanks should be
emptied. Ask where you can dispose of waste fuel and
chain oil at your local gas station.
• Ensure the machine is cleaned and that a complete
service is carried out before long-term storage.
• The guide bar cover must always be fitted to the
cutting attachment when the machine is being
transported or in storage, in order to prevent accident
contact with the sharp chain. Even a non-moving
chain can cause serious cuts to yourself or persons
you bump into with an exposed chain.
• Secure the machine during transport.
Long-term storage
Empty the fuel/oil tanks in a well ventilated area. Store the
fuel in approved cans in a safe place. Fit the guide bar
cover. Clean the machine. See instructions under the
heading Maintenance schedule.
!
WARNING! Fuel and fuel vapor are highly
flammable. Take care when handling fuel
and chain oil. Be aware of the risks of
fire, explosion and those associated with
inhalation.
!
WARNING! Never use a machine with
visible damage to the spark plug guard
and ignition cable. A risk of sparking
arises, which can cause a fire.
- 1154657-49 Rev.5 2013-12-10 2
- CONTENTS 7
- Before using a new chain saw 8
- Cutting equipment 11
- Tensioning the chain 13
- Lubricating cutting equipment 13
- GENERAL SAFETY PRECAUTIONS 14
- ASSEMBLY 15
- Gasoline 16
- Two-stroke oil 16
- Chain oil 16
- Fuel safety 17
- Starting and stopping 18
- WORKING TECHNIQUES 19
- Basic safety rules 19
- General rules 19
- Basic cutting technique 20
- Tree felling technique 21
- What is kickback? 22
- Carburetor adjustment 23
- Checking, maintaining and 23
- MAINTENANCE 24
- Chain catcher 24
- Right hand guard 24
- Vibration damping system 24
- Stop switch 24
- TECHNICAL DATA 26
- Kickback information 27
- YOUR WARRANTY RIGHTS AND 28
- OBLIGATIONS 28
- Kickback safety precautions 30
- Other safety precautions 30
- INTRODUCTION 31
- SOMMAIRE 32
- Mesures à prendre avant de 33
- Équipement de protection 34
- Équipement de sécurité de la 35
- Équipement de coupe 37
- Tension de la chaîne 38
- Carburant 42
- Remplissage de carburant 43
- Sécurité carburant 43
- Démarrage et arrêt 44
- TECHNIQUES DE TRAVAIL 45
- Règles élémentaires 45
- Techniques d’abattage 47
- Solution à un abattage raté 48
- Qu’est-ce qu’un rebond? 49
- Généralités 50
- Réglage du carburateur 50
- Contrôle, maintenance et 50
- Silencieux 51
- Filtre à air 51
- Épuration centrifuge ”CCS” 51
- ENTRETIEN 52
- CARACTÉRISTIQUES TECHNIQUES 53
- Information de rebond 54
- VOS DROITS ET OBLIGATIONS 55
- EN GARANTIE 55
- Autres consignes de sécurité 57
- INTRODUCCION 59
- Importante 61
- Equipo de protección personal 62
- Equipo de seguridad de la 62
- Equipo de corte 64
- Tensado de la cadena 66
- Carburante 69
- Repostaje 70
- Seguridad en el uso del 70
- Arranque y parada 71
- TECNICA DE TRABAJO 72
- Reglas básicas de seguridad 72
- Reglas básicas 72
- Técnica básica de corte 73
- Técnica de tala 74
- ¿Qué es la reculada? 76
- Generalidades 77
- Ajuste del carburador 77
- Silenciador 78
- Filtro de aire 78
- Depuración centrífuga ”CCS” 78
- MANTENIMIENTO 79
- DATOS TECNICOS 80
- Información de reculadas 81
- SUS DERECHOS Y 82
- OBLIGACIONES DE GARANTIA 82
Related products and manuals for Power chainsaws McCulloch CS 340
(17 pages)
(92 pages)
(38 pages)
Power chainsaws McCulloch 964830401 User Manual
(280 pages)
(280 pages)
Power chainsaws McCulloch CS 420T User Manual
(100 pages)
(100 pages)
© 2020, manymanuals.com. All rights reserved. | 0.669 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals